The 4B P800 Speed Switch with whirligig and magnetic base are a truly plug and play solution for monitoring your screw conveyor RPM. The assembly attaches directly to the tail shaft and is held in place with the included magnetic adapter. The intrinsic switch is used for detecting screw conveyor speed. Ease of use and mounting make this an ideal solution for keeping a remote eye on your screw conveyor.
SPECIFICATIONS | |
Supply Voltage – | 12 to 240 VDC / 24 to 240 VAC |
Output – | Voltage free change over relay 3A 240V max. |
Output State – | Output de-energized (off) with no target |
Max. Input Speed – | 5 Hz (300 PPM) |
Indication – | Red and green LED’s for target detection |
Operating Temperature – | -13°F (-25°C) to 158°F (70°C) |
Sensing Range – | Ferrous target – 1/2 inch (12 mm) maximum Non-ferrous target – 5/16 inch (6 mm) maximum |
Enclosure – | Nylon |
Conduit Entry – | 1/2 inch NPT |
Cable Length – | 6 ft. (2 m) |
Weight – | 1 lb. |
Protection – | IP67 |
Approvals – | CSA Class II Div 1 Groups E, F and G (USA and Canada) CE (Europe) |